Cleaning around the flame spreader - Remove the small flap. - Slide forward the remainder of the lid. - Lift from the back. When cleaning around the flame spreader, particles can fall into the drawer below. We recommend placing some paper over the contents of the drawer whilst cleaning. Please ensure the paper is removed after cleaning or it may ignite. We advise using a stiff dry brush to remove stubborn grease deposits around the base of the unit (see Fig.). Remove any remaining surface fat with a sponge while the oven is still warm. Place a brush or other suitable cleaning implement into the aperture and brush around the base of the unit with a suitable detergent. UNDER NO CIRCUMSTANCES SHOULD THE FLAME SPREADER BE REMOVED. After cleaning, replace the lids correctly.
FO 0177
FO 0176
Oven lamp replacement
Disconnect the appliance. Unscrew the lamp and substitute it with another suitable for higher temperatures (300°C) having the following characteristics: Voltage: Power: Connection: 230-240V (50Hz) 15W E14
FO 0424
Cooker Lid
The appliance is fitted with a lid: this is designed as a dust cover when closed, and as a splash-back when open. Do not use for any other purpose. After using the cooker, the lid MUST NOT be closed until the hob and oven are completely cold. Do not use the lid to switch off the gas supply. The gas supply should always be turned off with the control knob. Always ensure that the lid is free of any soilage or spillage before opening it.
Lid cleaning The cooker lid can be disassembled, to allow a better cleaning (see fig.). After a proper cleaning, carefully reposition the lid into its hinges.
